Architectural Coatings
Products
AGITAN 100 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.
AGITAN 105 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.
AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.
AGITAN 158 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 158 can be used in pigmented and non-pigmented water based systems. AGITAN 158 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.
AGITAN® 159 is a polysiloxane emulsion with excellent defoaming efficiency and persistance. It can be used in pigmented and non-pigmented water based systems. AGITAN® 159 is especially designed for hard to defoam systems, especially for spray applications and is easy to incorporate into the system. Main applications: Industrial and Wood Coatings Printing Inks Adhesives
AGITAN 230 is a highly effective defoamer for aqueous emulsion based and water reducible systems. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity systems. In low viscosity systems AGITAN 230 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.
AGITAN 265 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems, where only low emmisions are allowed. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 265 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.
AGITAN 271 is a special composition with excellent stability and high efficiency. The product is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.
AGITAN 315 is recommended for aqueous emulsion systems specifically for low odor formulations. It is compatible with all common binders.
AGITAN 350 is a special composition with excellent stability and high efficiency. The product is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN 351 is a special composition with excellent stability and high efficiency. AGITAN 351 is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN® 5091 is a unique defoaming technology with excellent stability and high efficiency, specifically formulated for use in a wide range of coatings applications. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.
AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. A non-ionic structure provides excellent compatibility with most common binders.
AGITAN® 760 N is a highly effective siloxane defoamer for water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.
AGITAN® 784 is a defoamer with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. AGITAN® 784 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. Main applications: Corrugated printing inks Packaging inks Printing inks for coated paper Heat-set adhesives Natural rubber / Neoprene latex-based adhesives OPV formulations Clear coatings Industrial coatings Wood coatings
AGITAN® 786N contains a high performance organo modified siloxane in combination with a polyoxyalkylene glycol carrier. AGITAN® 786N was designed to provide superior defoaming persistence and excellent dispersibility in a variety of aqueous coatings formulations without causing wetting defects such as craters or fisheyes.
AGITAN DF 681 F is a defoamer for all common emulsion systems.
AGITAN P 800 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 800 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN® P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN® P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN® P 801 DE is a blend of liquid hydrocarbons, fatty compounds and little silicone on an inorganic carrier. The product is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN® P 801 DE results in low foaming solutions, specifically aqueous pastes or masses with very low air content. Main applications: Joint fillers and putties Leveling compounds Screeds (cement and anhydride based) Gypsum Cement Mortars Powder paints Adhesives
AGITAN P 804 is recommended in such cases where oil based defoamers do not work. It is used in dry blends which are dissolved in water before application. The addition of AGITAN P 804 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
AGITAN® P 842 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN® P 842 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems the product shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. The use AGITAN® P 842 results in smooth surfaces. Main applications: Joint fillers and putties Self-leveling compounds Screeds (cement and anhydride based) Mortars
AGITAN P 845 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 845 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 845 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.
DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency. This defoamer is also alkali and acid resistant since it can be used in a pH- range between 3 and 11.
DEE FO 2020A is a cost-effective oil-based defoamer specifically formulated for use in architectural coatings, trade sales and traffic paint formulations.
A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.
DEE FO 3010A is a workhorse and cost effective oil-based defoamer for architectural coatings including trade sales. Can also be selected as an economical defoamer choice during the grind stage.
DEE FO 725E is a multi-purpose printing ink and general coatings defoamer with good dispersibility and persistence. Incorporation can be during application and as a press side foam reducer especially when rapid foam knockdown during recirculation is essential.
A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. DEE FO 97-3 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coatings formulations as well.
A 3-Dimensional siloxane compound defoamer designed for excellent wetting and compatibility in water-based systems.
DEE FO PI-35 is a defoamer that finds use in a broad range of various printing inks and coatings applications. Areas of use in the ink industry include the grind, as well as in the final ink formulations. DEE FO PI-35 is highly effective in most corrugated, packaging, envelope, metallic inks, news inks, and coatings for flooring. DEE FO PI- 35 is also efficient when used as a press-side defoamer.
An industry standard that provides formulators with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. DEE FO PI-40 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives.
EDAPLAN 395 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. EDAPLAN 395 is compatible with many emulsion polymers. It can be used over a wide alkaline pH range. EDAPLAN 395 reduces the mill base viscosity and provides higher pigment volume concentrations. It stabilizes pigments against flocculation particularly by using critical binders e.g. casein based binders.
EDAPLAN 397 is a non-ionic, liquid dispersing agent for pigments. It is especially designed for water-based systems, but it is also suitable for non water-based systems. EDAPLAN 397 is compatible with all common binders and shows only low foaming tendency. EDAPLAN 397 is suitable for coatings with indirect food contact. Furthermore its ingredients are biodegradable and partially based on renewable raw materials. EDAPLAN 397 is particularly suitable for dispersing organic pigments, i.e. phtalocyanine pigments. It can be used in binder free as well as binder containing grinds and pigment concentrates. EDAPLAN 397 reduces the viscosity of the grind, improves gloss and colour strength and prevents flocculation.
EDAPLAN 397 R is a bio-based drop-in for EDAPLAN 397. It is a non-ionic, liquid dispersing agent for pigments. It is especially designed for water-based systems, but it is also suitable for non water-based systems. EDAPLAN 397 R is compatible with all common binders and shows only low foaming tendency. EDAPLAN 397 R is suitable for coatings with indirect food contact. Furthermore its ingredients are biodegradable and partially based on renewable raw materials. The product is particularly suitable for dispersing organic pigments, i.e. phtalocyanine pigments. It can be used in binder free as well as binder containing grinds and pigment concentrates. EDAPLAN 397 R reduces the viscosity of the grind, improves gloss and color strength and prevents flocculation.
EDAPLAN 490 is a VOC-free wetting agent and dispersant for organic and inorganic pigments as well as carbon blacks in aqueous media. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 490 stabilizes pigment dispersions and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented. EDAPLAN 490 allows to achieve very high pigment loading at low dosage in binder free pigment paste formulations.
EDAPLAN 494 is a VOC-free wetting agent and dispersant for inorganic and transparent pigments, e.g. iron oxides and titanium dioxides, as well as for organic pigments in aqueous media. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 494 stabilizes pigment dispersions and reduces the mill-base viscosity.
EDAPLAN 495 is a "2-in-1" dispersing and stabilizing agent designed to disperse inorganic pigments for coatings and paints with a ph-value up to 12.5 like silicate based paints. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 495 stabilizes dispersed pigments. It achieves a stable viscosity in high alkaline systems. Gloss and color development are improved and reflocculation respectively Rub-out is prevented.
EDAPLAN 516 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. EDAPLAN 516 is compatible with many emulsion polymers. It can be used over a wide pH range and prevents the formation of settlements and stabilizes the system. EDAPLAN 516 is particularly suitable for dispersion of titanium dioxide, sheet silicates and fillers to achieve a constantly low paste viscosity.
EDAPLAN 910 is a solvent-free dispersing and wetting agent with an active content of 100%. It is designed to disperse organic and to a limited extend inorganic pigments for universal use in both water and solvent based systems. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 910 is especially suited to produce water based and binder free universal pigment concentrates which are used as tinters for water based emulsion paints and coatings as well as for solvent based alkyd systems. EDAPLAN 910 stabilises dispersed pigments and reduces mill-base viscosity. Gloss and colour development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents and suited for the use in emission free applications.
EDAPLAN 915 is a solvent-free dispersing and wetting agent with an active content of 100%. It is designed to disperse inorganic and organic pigments for universal use in both water and solvent based systems. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 915 is especially suited to produce water based and binder free universal pigment concentrates which are used as tinters for water based emulsion paints and coatings as well as for solvent based alkyd systems. EDAPLAN 915 stabilises dispersed pigments and reduces mill-base viscosity. Gloss and colour development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents and suitable for the use in emission free applications.
EDAPLAN 918 is a solvent-free dispersing and wetting agent with an active content of 100 %. It is designed to disperse organic pigments, carbon blacks and inorganic pigments for universal use in both, water and solvent based systems, including High Solids. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 918 stabilises dispersed pigments and reduces mill-base viscosity. Gloss and color development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents.
EDAPLAN 930 is a high molecular weight dispersing agent for solvent-based and high-solid systems. It is also suitable for water-based systems. EDAPLAN 930 is designed for dispersing organic and inorganic pigments, as well as fillers. EDAPLAN 930 reduces the viscosity at low shear ranges and stabilizes the pigments against flocculation. Furthermore it increases gloss and color strength of the coating.
EDAPLAN 935 is a high molecular weight dispersing agent for solvent-based and high-solid systems. It is especially designed for carbon blacks, but also suitable for dispersing organic and inorganic pigments, as well as fillers. EDAPLAN 935 reduces the viscosity at low shear ranges and stabilizes the pigments against flocculation. Furthermore it increases gloss and color strength of the coating.
EDAPLAN LA 402 is suitable for all aqueous and solvent-based coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems.
EDAPLAN LA 403 is suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems.
LEUKONÖL LBA-2 is a wetting agent, suitable for many aqueous systems. It provides excellent emulsifying and stabilizing properties, specifically in the manufacturing process of emulsion polymers. LEUKONÖL LBA-2 is clearly soluble at pH 13. It is the ideal wetting agent for alkaline systems.
LUBA-print® 459/H-2 is a wax dispersion of a paraffin combination in isoparaffinic hydrocarbon (boiling range: 153-178°C) and water in a ratio 57 : 15.
LUBA-print® 539/S is a wax dispersion used to water repellent impregnation and anti-graffiti.
LUBA-print® T-152/35%-D30 is a wax dispersion used to to improve slip property of wood surfaces and water proofing of wood surfaces of solvent-based paints.
LUBA-print® WBP 00125 is a water-based wax dispersion, based on a micronized biopolymer. Application in water-based lacquers and paints, water-based printing inks anti-slip additive to improve anti-blocking and hot blocking to improve abrasion resistance and matting Properties Renewable organic carbon content according to ASTM D6866: 90-100% Readily biodegradable according to OECD standards
LUBA-print® WBP 2700 is a bio-based wax dispersion. Application & Properties: Microplastic-free Renewable organic carbon content acc. to ASTM D 6866: 85-95% Readily biodegradable acc. to OECD 301 Aqueous lacquer and paints: improves slip property and mar resistance Aqueous printing inks: improves slip, rub and mar resistance with good gloss stability
LUBRANIL® DF 19eco is a water based VOC free wax dispersion for application in wood coatings, dispersion paints & plasters.
LUBRANIL® DF 45 is a water based VOC free wax dispersion for application in wood coatings, dispersion paints & plasters.
LUBRANIL® DF 45eco is a water based VOC free wax dispersion for application in wood coatings, dispersion paints & plasters.
LUBRANIL® MA 1 is a new generation of easy pumpable open time additives for plasters and other dispersion systems.
LUBRANIL® N 20 is a water based dispersion for pasty plasters and waterborne dispersion paints. LUBRANIL® N 20 is very suitable for polymeric, silicate and silicone based systems.
LUBRANIL® OT 300 is a VOC free dispersion specifically developed for paints and textured coatings as well as for pigment pastes. LUBRANIL® OT 300 is suitable to reduce the VOC content of coatings.
LUBRANIL® OT 300eco is a VOC-free dispersion especially developed for paints and textured coatings as well as for pigment pastes. LUBRANIL® OT 300eco is targeted to companies being interested to reduce the VOC content of their coatings.
LUBRANIL® RN 20 is a water based dispersion for pasty plasters and waterborne dispersion paints. LUBRANIL® RN 20 is very suitable for polymeric, silicate and silicone based systems.
LUBRANIL® X 4000 is a pumpable water-based environmental friendly dispersion for resin bound plasters as well as for silicate and silicone based systems and water-based paints.
LUBRANIL® X 9030 is a new pumpable water-based environmental friendly dispersion for resin bound plasters as well as for silicate and silicone based systems and water-based paints.
METOLAT 355 is a wetting agent with low foam tendencies, suitable for many aqueous systems. Due to its nonionic character METOLAT 355 is compatible with many different raw materials with broad pH stability. It provides excellent pigment and substrate wetting. METOLAT 355 improves pigment compatibility and leveling in emulsion paints and water reducible systems.
METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.
APEO-free wetting agent with excellent equilibrium and dynamic surface tension reduction.
METOLAT 367 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. METOLAT 367 is specifically suitable for systems in contact with food. The product is VOC free according to 2004/42/EC.
METOLAT 368 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. The product is VOC free according to 2004/42/EC.
METOLAT 388 is a low foaming wetting agent which is suitable for many aqueous and non-aqueous systems. It improves the pigment dispersion in emulsion paints especially with pigments which are difficult to disperse. METOLAT 388 prevents flocculation of the particles caused by emulsifier migration after long storage of the paint or through a mechanical or thermal shock. METOLAT 388 is biodegradable and is recommended specifically for environmental safe systems. METOLAT 388 is suitable for wire drawing.
METOLAT 392 is a solvent-free dispersing and wetting agent for carbon blacks in aqueous media. It is ideal for the manufacturing of aqueous coatings systems based on polymer solutions and / or polymer emulsions (air dry and force dry, 2K-systems) as well as for the manufacturing of aqueous resin-free pigment concentrates. METOLAT 392 stabilises dispersed carbon blacks and reduces the mill-base viscosity. Gloss and colour development are improved and reflocculation is prevented.
METOLAT 394 is a solvent-free dispersing and wetting agent especially designed for transparent iron oxide pigments in aqueous media. It is ideal for the manufacturing of aqueous coating systems based on polymer solutions and / or polymer emulsions (air dry and forced dry, 2K-systems) as well as for the manufacturing of aqueous resin-free pigment concentrates. METOLAT 394 stabilises dispersed transparent iron oxide pigments and reduces the mill-base viscosity. Gloss, colour development and transparency are improved and reflocculation is prevented. Recommended for silicate paints and high pH coatings.
METOLAT 514 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. METOLAT 514 is compatible with many emulsion polymers. It can be used over a wide pH range. METOLAT 514 reduces the mill base viscosity and provides higher pigment volume concentrations. It prevents the formation of settlements and stabilizes the system.
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
METOLAT N 50 is an aqueous dispersion of hydrophobic compounds which is easy to emulsify in water. METOLAT N 50 leads to an extension of the open-time of waterbased emulsion paints.
METOLAT P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration. Colour strength is increased and the pigment can be used more efficiently. METOLAT P 588 improves the homogeneous distribution of the pigments and prevents their floading to the surface. In powder paints the use of METOLAT P 588 prevents rub-out effects. METOLAT P 588 also prevents efflorescence („lime bloom“).
METOLAT® P 588 DE is a blend of polyglycol ester with an inorganic carrier, nonionic. The product is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 588 DE results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 588 DE leads to a faster wetting of the pigment surface and prevents reagglomeration. Colour strength is increased and the pigment can be used more efficiently. METOLAT® P 588 DE improves the homogeneous distribution of the pigments and prevents their floading to the surface. In powder paints the use of METOLAT® P 588 DE prevents rub-out effects. It also prevents efflorescence („lime bloom“). Main applications: Joint fillers Leveling compounds Screeds (cement and anhydrite based) Plasters Mortars Powder paints Premixed pigment powder
METOLAT P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration. Colour strength is increased and the pigment can be used more efficiently. METOLAT P 590 improves the homogeneous distribution of the pigments and prevents their floading to the surface. In powder paints the use of METOLAT P 590 prevents rub-out effects. METOLAT P 590 also prevents efflorescence („lime bloom“).
METOLAT P 860 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 860 reduces shrinkage in cementitious systems and acts as coalescent in powder paints.
METOLAT P 872 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 872 reduces the shrinkage in cementitious systems.
OMBRELUB 730 is an emulsion of fatty derivatives in water. It is easily miscible with water at all ratios. In emulsion based plasters OMBRELUB 730 leads to a prolongation of open-time and a reduction of cracks. Processing properties are improved.
OMBRELUB RA shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. The release effect maintains also during storage at elevated temperature. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers.
SÜDRANOL® 340 is a water based polyethylene wax dispersion for use in paints and varnishes, as well as lubricant applications.
SÜDRANOL® 340eco is a water based polyethylene wax dispersion for use in paints and varnishes.
TAFIGEL AP 10 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 10 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 15 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 16 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 16 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 17 is synthetic acrylate-based thickener for coatings and paints with a pH-value up to 12. It is particularly designed for an enhanced storage stability and to minimize the post thickening effects in paints such as silicate-based interior- and exterior wallpaints. Moreover, it does not raise the undesired elastic behaviour and ensures a good application ability of paints. This product increases notably the wet abrasion resistance compared to cellulose ethers.
TAFIGEL AP 18 is a highly hydrolysis stable and effective synthetic acrylate-based thickener for coatings and paints with extreme pH-values up to 13. This product does not raise the undesired elastic behaviour and ensures a good application ability of paints and coatings. Moreover, it increases notably the wet abrasion resistance compared to cellulose ethers.
TAFIGEL® AP 75 N is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL® AP 75 N requires an alkaline pH-value (>8) for optimum efficiency. Main applications: Decorative Coatings Industrial and wood coatings Architectural coatings Adhesives Printing inks Paper coatings Conforms with 21 CFR 176.170 and 176.180: When used at a maximum level of 1% in coatings applied to uncoated or clay coated paper and paperboard at a maximum rate of 6 lb/1000 ft2 (wet basis).
TAFIGEL PUR 41 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 41 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 41 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints,silicate paints, high pH coatings, latex paints, anti- corrosive paints, emulsion plasters, adhesives, joint fillers, industrial and institutional cleaners and car care
TAFIGEL PUR 45 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 45 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 45 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 45 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, emulsion plasters, adhesives, printing inks and joint fillers.
TAFIGEL PUR 48 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 48 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 48 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, joint fillers, Industrial and institutional cleaners.
TAFIGEL PUR 52 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 52 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 52 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties, industrial and institutianal cleaners.
TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks.
TAFIGEL PUR 54 R is a bio-based drop-in for TAFIGEL PUR 54. It is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 R can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners. TAFIGEL PUR 54 R is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks.
TAFIGEL PUR 55 is designed as a solvent-free “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. Aqueous paints with TAFIGEL PUR 55 show minimum pseudoplasticity, similar to rheology profiles of solvent borne lacquers. It can be used alone or in combination with other TAFIGEL thickeners, as well as with cellulosic and acrylic thickeners. TAFIGEL PUR 55 is recommended for use in following systems: Interior/ exterior architectural paints, high gloss coatings, anti- corrosive paints, emulsion plasters, printing inks, adhesives and joint fillers.
TAFIGEL PUR 56 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 56 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 56 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 60 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 60 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 60 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 61 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 61 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 61 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners. TAFIGEL® PUR 61 has been optimized for easy handling and easy incorporation. In many cases, the thickener can also easily be used in post-dosing.
TAFIGEL PUR 62 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 62 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 62 is recommended for use in industrial coatings. It is also recommended for following systems: interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 64 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.
TAFIGEL PUR 64 R is a bio-based drop-in for TAFIGEL PUR 64. It is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 R exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 R can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.
TAFIGEL PUR 65 is an associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 65 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 65 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and putties.
TAFIGEL PUR 80 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 80 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 80 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 80 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.
TAFIGEL® PUR 84 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL® PUR 84 can be used alone or in combination with other TAFIGEL® thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL® PUR 84 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL® PUR 84 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. Advantages of using TAFIGEL® PUR 84: thickening independent of pH excellent flow, leveling and gloss good spatter resistance excellent colour acceptance on tinting The performance of polyurethane thickeners is affected by many factors including binder type, co-solvents, coalescing agents, surfactants/wetting agents, pigments and flattening agents. The interactions of TAFIGEL® PUR 84 with these compounds allow varied possibilities for rheology adjustment.
TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.
WÜKONIL® FC 950 is a wax additive specifically developed for waterborne systems such as façade paints and plaster.
WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as façade paints and plasters.
WÜKONIL® FC 960eco is a wax additive specially developed for waterborne systems such as façade paints and plasters.
WÜKONIL® HB 3000eco is an efficient waterborne additive for unpigmented and pigmented wood coatings as well as for water based interior and exterior paints and pasty plasters.
WÜKONIL® HB 4000 is an emulsifier-free wax dispersion for application as additive in waterborne polymer systems.
WÜKONIL® 6000 is used as an additive in matt and glossy dispersion paints and resin bounded plasters.
WÜKONIL® HS is a polymer wax dispersion for waterborne coating systems.
WÜKONIL® LP 35 is an aqueous, acid-stable paraffin-emulsion with high chemical stability for waterbased systems.
WÜKONIL® LP 50 is a waterborne wax additive for matt and glossy dispersion paints for interior and exterior use as well as for synthetic resin-bound rendering dispersion plasters.
WÜKONIL® LP 50eco is a waterborne wax additive for matt and glossy dispersion paints for interior and exterior use as well as for synthetic resin-bound rendering dispersion plasters.
WÜKONIL® NAT 1000 is an aqueous emulsion for the application in aqueous lacquers and paint systems like wood coatings, dispersion paints and plasters. Content of renewable raw materials >90% (calculated on solid content) Content of readily bio-degradable raw materials >90% (calculated on solid content) Improves early rain resistance and provides good hydrophobic properties Drying at temperatures between 60-80 °C can increase the hydrophobing effect additionally Low dirt pick-up Gloss Slip Anti-blocking
WÜKONIL® PW is a water based wax dispersion for application in varnish and paint systems.
WÜKONIL® RT 50 is a paraffin wax dispersion for water based coatings.
WÜKONIL® RT 50 F is an aqueous wax-dispersion for waterbased coating systems.
WÜKONIL® WR 60 is a waterborne wax additive specifically developed for waterborne systems such as façade paints and plasters.
