Industrial Coatings
Products
AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. The resulting emulsion is not stable against separation and has to be stirred before use.
AGITAN 155 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 155 is resistant to alkaline environment. It can be used between pH 6 and 11.
AGITAN 156 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 156 can be used in pigmented and non-pigmented water based systems. AGITAN 156 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.
AGITAN 158 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 158 can be used in pigmented and non-pigmented water based systems. AGITAN 158 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.
AGITAN® 159 is a polysiloxane emulsion with excellent defoaming efficiency and persistance. It can be used in pigmented and non-pigmented water based systems. AGITAN® 159 is especially designed for hard to defoam systems, especially for spray applications and is easy to incorporate into the system. Main applications: Industrial and Wood Coatings Printing Inks Adhesives
AGITAN 271 is a special composition with excellent stability and high efficiency. The product is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.
AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.
AGITAN 351 is a special composition with excellent stability and high efficiency. AGITAN 351 is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 12.
AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. A non-ionic structure provides excellent compatibility with most common binders.
AGITAN® 760 N is a highly effective siloxane defoamer for water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.
AGITAN 761 is a highly effective siloxane defoamer for water reducible systems. It is particularly effective in aqueous printing inks. The nonionic structure provides excellent compatibility with most common binders.
AGITAN 765 is a highly effective siloxane defoamer which is specifically designed for the use in water-based wood coatings. It is especially characterized by its rapid effectiveness in combination with a good long-term effectiveness. Due to ist compatibility it is very universally applicable particularly in parquet lacquers and HVLP spray coatings.
AGITAN® 784 is a defoamer with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. AGITAN® 784 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. Main applications: Corrugated printing inks Packaging inks Printing inks for coated paper Heat-set adhesives Natural rubber / Neoprene latex-based adhesives OPV formulations Clear coatings Industrial coatings Wood coatings
AGITAN® 786N contains a high performance organo modified siloxane in combination with a polyoxyalkylene glycol carrier. AGITAN® 786N was designed to provide superior defoaming persistence and excellent dispersibility in a variety of aqueous coatings formulations without causing wetting defects such as craters or fisheyes.
AGITAN DF 311M is a defoamer for all common solvent based systems.
AGITAN® DF 6422 is a defoamer for non-aqueous systems. Its special composition provides excellent compatibility and high efficiency and is free of polyfluoroalkyl substances (PFAS). This defoamer is highly recommended for high solid systems, floorings and all common solventborne coating applications - Can be used as supplied - Easily dispersible in most organic solvents
Release and antiblocking agent for polyolefin flow distribution; Internal lubricant and antiblocking agent.
Lubricant / demoulding agent for engineering plastic (PA, PC, PET); Matting agent; Degassing agent for powder coatings; Improved slip, abrasion resistance and antiblocking properties.
Matting agent; Degassing agent for powder coatings; Improved slip, abrasion resistance and antiblocking properties.
Application in powder coatings, wood coatings, sinter & ceramic technology, die casting and masterbatch.
Texturing agent for paints & coatings; Lubricant for pressing and processing of sinter powder and ceramics.
Degassing agent; No yellowing (< 230 °C); Improves scratch- and abrasion resistance; Matting agent; Improved slip properties.
Spherical, micronized carnauba wax for application in paints and coatings (e.g. powder, can, car, industrial, building, furniture and floor coatings and UV systems), printing inks (e.g. overprint, screen, flexo, offset and intaglio inks) and wire drawing.
Micronized carnauba wax for application in paints and coatings (e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings, UV systems).
Spherical, micronized non polar polyethylene wax for application in paints and coatings (e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings) and printing inks (e.g. water and solvent based liquid inks).
Very good scratch- and abrasion resistance; Matting agent; Very good dispersion properties and – compatibility; Good antiblocking; Good Slip.
Spherical, micronized, non-polar polyethylene wax for application in masterbatch and plastics industry.
Excellent abrasion and scratch resistance; High-melting and hard; Improved temperature stability compared to other PE waxes; Excellent antiblocking.
Spherical, micronized polyolefin wax modified with PTFE for application in paints and coatings (e.g. can - and coil-, wood-, industrial- and powder coatings)
For application in paints and coatings (e.g. powder, can, automotive, industrial, construction, furniture and parquet coatings), printing inks (e.g. gravure, overprint, flexo, heatset and sheetfed inks), technical applications (e.g. lubricant manufacturers) and wire drawing.
Very good scratch- and abrasion resistance; Good gloss and lubricating properties; Good temperature stability; Good solvent resistance; Higher PTFE content than CERETAN MXF 9510 D.
Spherical, micronized, polar polyolefin wax for application in water based paints and coatings, such as industrial paints, furniture, powder and floor coatings and printing inks, such as packaging and gravure inks.
Micronized polypropylene wax for application in paints and coatings, such as powder coatings, industrial paints, architectural, furniture and floor coatings and printing inks, such as gravure, overprint, screen printing and flexographic inks.
Micronized polypropylene wax, coated with silica for application in paints and coatings, such as industrial paints, wood coatings, overprint varnishes and UV-coating systems.
Spherical, micronized Fischer Tropsch wax for application in paints and coatings (e.g. powder-, can-, coil-, auto-, industrial-, furniture- and parquet coatings) and printing inks (e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks)
High melting, spherical, micronized Fischer-Tropsch wax for application in paints and coatings (e.g. powder-, can-, coil-, car-, industrial-, wood-, furniture- and parquet coatings) and printing inks (e.g. overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks).
Spherical, micronized Fischer-Tropsch wax for application in paints and coatings (e.g. powder-, can-, coil-, car-, industrial-, furniture- and parquet coatings) and printing inks (e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks).
Improved surface properties of paints and coatings; Excellent Matting properties; Excellent scratch and abrasion resistance; Improved Antiblocking; Pleasant haptic effect (“soft-feel”) in wood coatings.
Micronized functional blend for application in paints and coatings (e.g. powder-, can-, furniture-, parquet- and industrial coatings). Main properties: Improved slip Improved scratch and abrasion resistance Good matting Good sandability Good anti-blocking properties Pleasant soft haptic (soft-feel) Increased resistance against metal marking
Spherical, micronized functional blend, based on Polyethylene and Amide wax for application in paints and coatings (e.g. wood and powder coatings) and masterbatch.
Spherical, micronized polyolefin wax for application in printing inks (especially for gravure- and flexo inks), paints and coatings (especially for powder-, furniture-, parquet- and industrial coatings) and masterbatch.
CERETAN® MX 9825 is a spherical, micronized polyolefin wax for application in masterbatch and all major kinds of plastics processing (e.g. extrusion, injection molding, blow molding, thermo forming).
CERETAN® MXBP 60125 is a spherical, micronized functional blend based on 100% waxes from biological, renewable resources.
CERETAN® MXD 3920 is a micronized wax preparation, with a coating which provides diamond- like hardness for application in paints and coatings (e.g. industrial coatings, powder coatings, wood coatings, Can und Coil Coating).
CERETAN® MXF 10325 is a spherical, micronized polyethylene wax, coated with PTFE for application in paints and coatings (e.g. powder-, can-, coil-, car-, industrial- and wood coatings) and printing inks (e.g. flexo-, gravure-, overprint- and offset inks).
CERETAN® MXF 9820 D is a spherical, micronized polyolefin wax, coated with PTFE for application in printing inks, paints and coatings (e.g. powder-, coil-, car-, industrial-, furniture- and parquet coatings).
CERETAN® MXF 9899 is a spherical, micronized functional blend, coated with PTFE for application as a texturing agent for paints and coatings, such as powder and wood coatings.
CERETAN® MXS 3615 is a spherical, micronized carnauba wax, coated with silica for application in powder metallurgy, paints and coatings (e.g. industrial and wood coatings) and printing inks
CERETAN® MXS 3815 is a spherical, micronized functional blend, coated with silica for application in paints and coatings, such as industrial and wood coatings and printing inks.
CERETAN® XT 23099 is a micronized, high molecular weight polyolefin wax for application as a texturing additive for coatings (e.g. wood, plastics and metal coating).
CERETAN® XT 23299 is a micronized, high molecular weight polyolefin based wax for application as a texturing additive for coatings (e.g. wood, plastics and metal coating).
CERETAN® XT 23499 is a micronized high molecular weight polyolefin based wax for application as a texturing additive for coatings (e.g. wood, plastics and metal coating).
CERETAN® XT 23599 E is a micronized, biopolymer based wax for application as a texturing additive for coatings (e.g. wood, plastics and metal coating).
CERETAN® XT 23699 E is a micronized, biopolymer based wax for application as a texturing additive for coatings (e.g. wood, plastics and metal coating).
CERETAN® XT 23799 E is a micronized, biopolymer based wax for application as a texturing additive for coatings (e.g. wood, plastics and metal coating).
DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency. This defoamer is also alkali and acid resistant since it can be used in a pH- range between 3 and 11.
DEE FO 2020A is a cost-effective oil-based defoamer specifically formulated for use in architectural coatings, trade sales and traffic paint formulations.
A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.
DEE FO 3010A is a workhorse and cost effective oil-based defoamer for architectural coatings including trade sales. Can also be selected as an economical defoamer choice during the grind stage.
DEE FO 3010E/50 is a highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.
DEE FO 725E is a multi-purpose printing ink and general coatings defoamer with good dispersibility and persistence. Incorporation can be during application and as a press side foam reducer especially when rapid foam knockdown during recirculation is essential.
A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. DEE FO 97-3 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coatings formulations as well.
A 3-Dimensional siloxane compound defoamer designed for excellent wetting and compatibility in water-based systems.
DEE FO PI-35 is a defoamer that finds use in a broad range of various printing inks and coatings applications. Areas of use in the ink industry include the grind, as well as in the final ink formulations. DEE FO PI-35 is highly effective in most corrugated, packaging, envelope, metallic inks, news inks, and coatings for flooring. DEE FO PI- 35 is also efficient when used as a press-side defoamer.
An industry standard that provides formulators with an excellent combination of defoaming performance and pinhole free substrate wetting over a wide variety of applications. DEE FO PI-40 can be utilized in most printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. The defoamer is also highly effective in a large range of OPV, emulsion polymers, industrial paints, wood coatings, and adhesives.
DEE FO PI-547 is a universal oil free product designed for use in many industries including PVOH adhesives, high solids content coatings and printing ink. Aqueous ink systems include flexible film, OPV and metallic.
DEE FO XKF-1B is an excellent choice for defoaming a wide variety of high gloss industrial and architectural coating applications.
EDAPLAN 470 is a wetting agent and dispersant for organic and inorganic pigments and extenders in aqueous media and also suitable for solvent-based systems. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 470 stabilizes dispersed pigments and extenders and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented.
EDAPLAN 472 is a wetting agent and dispersant for organic and inorganic pigments and extenders in aqueous media and also suitable for solvent-based systems. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 470 stabilizes dispersed pigments and extenders and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented.
EDAPLAN 480 is a solvent free wetting agent and dispersant for organic and inorganic pigments and extenders in aqueous media. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 480 stabilizes dispersed pigments and extenders and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented. Base paints made with EDAPLAN 480 show very good compatibility on tinting with pigment concentrates.
EDAPLAN 482 is a solvent free wetting agent and dispersant for organic and inorganic pigments and extenders in aqueous media. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 482 stabilizes dispersed pigments and extenders and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented. Base paints made with EDAPLAN 482 show very good compatibility on tinting with pigment concentrates.
EDAPLAN 490 is a VOC-free wetting agent and dispersant for organic and inorganic pigments as well as carbon blacks in aqueous media. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 490 stabilizes pigment dispersions and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented. EDAPLAN 490 allows to achieve very high pigment loading at low dosage in binder free pigment paste formulations.
EDAPLAN 492 is a VOC-free wetting agent and dispersant for carbon blacks in aqueous media. EDAPLAN 492 is also recommended for the dispersion of organic pigments (e.g. phthalocyanine and azo pigments) and nanoscale transparent iron oxides and titanium dioxides. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 492 stabilizes pigment dispersions and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented.
EDAPLAN 494 is a VOC-free wetting agent and dispersant for inorganic and transparent pigments, e.g. iron oxides and titanium dioxides, as well as for organic pigments in aqueous media. It can be used for the production of coating systems based on polymer emulsions and water-soluble resins (air and oven drying, 2K systems) as well as for the production of aqueous and glycol-containing, binder-free pigment concentrates. EDAPLAN 494 stabilizes pigment dispersions and reduces the mill-base viscosity.
EDAPLAN 711 is a high molecular weight dispersing agent for solvent borne and high solid systems. It is designed for dispersing and stabilization of organic as well as inorganic pigments and carbon blacks. EDAPLAN 711 reduces the viscosity at low shear ranges and stabilizes the pigments against flocculation. Furthermore it increases gloss and colour strength of the coating.
EDAPLAN 910 is a solvent-free dispersing and wetting agent with an active content of 100%. It is designed to disperse organic and to a limited extend inorganic pigments for universal use in both water and solvent based systems. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 910 is especially suited to produce water based and binder free universal pigment concentrates which are used as tinters for water based emulsion paints and coatings as well as for solvent based alkyd systems. EDAPLAN 910 stabilises dispersed pigments and reduces mill-base viscosity. Gloss and colour development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents and suited for the use in emission free applications.
EDAPLAN 915 is a solvent-free dispersing and wetting agent with an active content of 100%. It is designed to disperse inorganic and organic pigments for universal use in both water and solvent based systems. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 915 is especially suited to produce water based and binder free universal pigment concentrates which are used as tinters for water based emulsion paints and coatings as well as for solvent based alkyd systems. EDAPLAN 915 stabilises dispersed pigments and reduces mill-base viscosity. Gloss and colour development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents and suitable for the use in emission free applications.
EDAPLAN 918 is a solvent-free dispersing and wetting agent with an active content of 100 %. It is designed to disperse organic pigments, carbon blacks and inorganic pigments for universal use in both, water and solvent based systems, including High Solids. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN 918 stabilises dispersed pigments and reduces mill-base viscosity. Gloss and color development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents.
EDAPLAN 930 is a high molecular weight dispersing agent for solvent-based and high-solid systems. It is also suitable for water-based systems. EDAPLAN 930 is designed for dispersing organic and inorganic pigments, as well as fillers. EDAPLAN 930 reduces the viscosity at low shear ranges and stabilizes the pigments against flocculation. Furthermore it increases gloss and color strength of the coating.
EDAPLAN 935 is a high molecular weight dispersing agent for solvent-based and high-solid systems. It is especially designed for carbon blacks, but also suitable for dispersing organic and inorganic pigments, as well as fillers. EDAPLAN 935 reduces the viscosity at low shear ranges and stabilizes the pigments against flocculation. Furthermore it increases gloss and color strength of the coating.
EDAPLAN LA 106 HF is an additive for all common solvent systems.
EDAPLAN LA 402 is suitable for all aqueous and solvent-based coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems.
EDAPLAN LA 403 is suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems.
EDAPLAN LA 410 is suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN LA 410 is recommended for improved scratch resistance and slip of metallic effect lacquers and varnishes. It prevents surface defects like craters and orange peel. EDAPLAN LA 410 provides defoaming and degassing. It does not influence recoatability of the paint film if used at recommended treat levels.
EDAPLAN® LA 411 is designed for water reducible resin systems and high solids. It improves surface properties e.g. leveling, craters, orange peel, scratch resistance and gloss. EDAPLAN® LA 411 does not influence recoatibility if used at recommended treat levels.
EDAPLAN LA 413 is suitable for all non-aqueous and water reducible coating systems. It improves slip, scratch resistance and leveling. EDAPLAN LA 413 provides improved surface properties specifically in clear systems. It does not create foam and is resistant to hydrolysis.
EDAPLAN® LA 414 is suitable for water-based and solvent-based systems. The product provides excellent slip properties and improves levelling and scratch resistance. It does not influence recoatability. EDAPLAN® LA 414 does not stabilize foam.
EDAPLAN LA 415 is suitable for water-based and solvent-based systems. The product provides excellent slip properties and improves levelling and scratch resistance. EDAPLAN LA 415 does not stabilize foam.
EDAPLAN LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 451 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.
EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.
FOAMTROL 105 is a low viscosity silicone compound that is designed to meet specific performance requirements efficiently and economically in industrial applications. It is used in non-aqueous and, in many instances, aqueous products and systems. It is readily pourable and may be used to prepare silicone-based foam preventive emulsions.
FOAMTROL 110 is an excellent low viscosity siloxane compound suitable for UV applications.
LEUKONÖL LBA-2 is a wetting agent, suitable for many aqueous systems. It provides excellent emulsifying and stabilizing properties, specifically in the manufacturing process of emulsion polymers. LEUKONÖL LBA-2 is clearly soluble at pH 13. It is the ideal wetting agent for alkaline systems.
LUBA-print® 154/S is a wax dispersion used to improve slip and mar resistance in aqueous paint-systems and to improve rub resistance in aqueous flexo printing inks.
LUBA-print® 164/G is a wax dispersion used in water-based lubricants and release agents, to improve slip and scratch resistance in water-based lacquersand to improve anti-blocking effect in pelletizing aids for granulation.
LUBA-print® 184/W is a wax dispersion is used to improve surface slip and mar resistance in aqueous coatings and improve rub resistance in aqueous flexo printing inks. The melting range is approx. 112°C.
LUBA-print® 246/D 8 is a wax dispersion used to improve thixotropy and fixation in metallic-paints (base-coat).
LUBA-print® 266/W is a wax dispersion used to improve abrasion and rub resistance in solvent-based lacquers.
LUBA-print® 280/F is a wax dispersion used to improve slip behaviour and hydrophoby in waterbased lacquers and coating systems. The drop point is approx. 81°C.
LUBA-print® 346/F is a wax dispersion used to reduce settling property and improve slip property in lacquers and glaze.
LUBA-print® 501/S-100 is a wax dispersion used to improve scratch resistance and slip property of can-coatings and industrial lacquers.
LUBA-print® 694/R is a wax dispersion for application in adhesives for bonding metal foil and polyolefin.
LUBA-print® 706/F is a wax dispersion used to improve matting and scratch resistance of wood lacquers.
LUBA-print® 725 is a rheology-modifying wax emulsion to improve the effect pigment orientation in aqueous coatings.
LUBA-print® 887/K is a wax dispersion used to improve mar resistance and antiblocking of solvent-based lacquers.
LUBA-print® 914/A is a wax dispersion used for matting, to improve soft feel and to improve scratch resistance with good antiblocking properties of wood lacquers.
LUBA-print® 942/P is a wax dispersion used in waterbased paints and stains to improve slip, antiblocking and water resistance and brushing paints for paper and paperboard to improve hydrophobicity and antiblocking properties.
LUBA-print® T-152/D30 is a wax dispersion used to improve slip property of wood surfaces, to improve water proofing of wood surfaces and as a temporary corrosion protection for metal surfaces of solvent-based paints.
LUBA-print® W 5725 is a water based hybrid dispersion with specific bimodal particle size distribution for application in wood coating, printing inks, industrial coatings.
LUBA-print® WP 2120 is a wax dispersion for application in aqueos lacquer and paints and aqueos printing inks.
LUBA-print® WP 2120 FC is a wax dispersion used to improve matting and abrasion resistance of aqueous paint-system.
LUBA-print® WX 9825 is a wax dispersion used to aqueous lacquers and paints and aqueous flexo- and gravure printing inks.
METOLAT 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems.
Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood. METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.
METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.
METOLAT 340 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension.
METOLAT 342 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension.
METOLAT 344 is a low foaming wetting agent for all common aqueous systems. The product strongly reduces the static and dynamic surface tension and improves wetting and flow, especially on substrates that are difficult to wet. It has been specially developed to increase the penetration of wood coatings.
METOLAT 348 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension.
METOLAT 355 is a wetting agent with low foam tendencies, suitable for many aqueous systems. Due to its nonionic character METOLAT 355 is compatible with many different raw materials with broad pH stability. It provides excellent pigment and substrate wetting. METOLAT 355 improves pigment compatibility and leveling in emulsion paints and water reducible systems.
METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.
APEO-free wetting agent with excellent equilibrium and dynamic surface tension reduction.
METOLAT 366 is a low foaming non-ionic wetting agent for water-based printing inks, adhesives and clear as well as pigmented coatings. It improves substrate wetting and levelling by reduction of surface tension. METOLAT 366 shows defoaming properties in many systems.
METOLAT 367 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. METOLAT 367 is specifically suitable for systems in contact with food. The product is VOC free according to 2004/42/EC.
METOLAT 368 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and levelling. The product is VOC free according to 2004/42/EC.
METOLAT 388 is a low foaming wetting agent which is suitable for many aqueous and non-aqueous systems. It improves the pigment dispersion in emulsion paints especially with pigments which are difficult to disperse. METOLAT 388 prevents flocculation of the particles caused by emulsifier migration after long storage of the paint or through a mechanical or thermal shock. METOLAT 388 is biodegradable and is recommended specifically for environmental safe systems. METOLAT 388 is suitable for wire drawing.
METOLAT 392 is a solvent-free dispersing and wetting agent for carbon blacks in aqueous media. It is ideal for the manufacturing of aqueous coatings systems based on polymer solutions and / or polymer emulsions (air dry and force dry, 2K-systems) as well as for the manufacturing of aqueous resin-free pigment concentrates. METOLAT 392 stabilises dispersed carbon blacks and reduces the mill-base viscosity. Gloss and colour development are improved and reflocculation is prevented.
METOLAT 394 is a solvent-free dispersing and wetting agent especially designed for transparent iron oxide pigments in aqueous media. It is ideal for the manufacturing of aqueous coating systems based on polymer solutions and / or polymer emulsions (air dry and forced dry, 2K-systems) as well as for the manufacturing of aqueous resin-free pigment concentrates. METOLAT 394 stabilises dispersed transparent iron oxide pigments and reduces the mill-base viscosity. Gloss, colour development and transparency are improved and reflocculation is prevented. Recommended for silicate paints and high pH coatings.
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
MÜNZING’s METOLAT® 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The product range is formulated with varying HLB values to provide optimal compatibility and performance based on the system chemistry and application requirements. Main applications: Printing ink Coatings; architectural, wood and industrial Overprint varnishes Adhesives
METOLAT ETC 1 is a surface additive which provides easy to clean surfaces, reduced adhesion of spray paints and increased marker resistance. It also guarantees pronounced tape release and slip properties. It should only be used in solvent-based systems. Due to its hydroxy functionality, it can be permanently anchored in the binder matrix using suitable 2-component systems, e.g. based on acrylate/isocyanate.
METOLAT LA 524 is an universal wetting and dispersing agent. It is recommended for all solvent borne paint and lacquer systems to prevent flocculation and to improve grinding. It is suitable to disperse BentoneTM gelling agents. (BentoneTM is a trademark of Elementis Specialities.).
OMBRELUB MA 2 is a stable matting agent dispersion for water-based printing inks, wood coatings and other coatings. Due to its small particle size it is suitable for low wet film thicknesses. OMBRELUB MA 2 is specifically suitable to achieve semi matt effects and provides outstanding transparency. Furthermore it increases scratch and chemical resistance of the coating. In many coatings the use of OMBRELUB MA 2 leads to a soft feel touch. In contrast to many other matting agents OMBRELUB MA 2 does not have a negative effect on the performance of polyurethane thickeners.
OMBRELUB MA 4 is a stable matting agent dispersion for water-based printing inks, wood varnishes and other coatings. Due to its small particle size it is also suitable for low wet film thicknesses. OMBRELUB MA 4 is particularly suitable for achieving silk matt effects and is characterized by its excellent transparency. Due to the special silica formulation, a very homogeneous, highly efficient matting can be achieved. It also increases the scratch resistance and chemical resistance of the coating. In many coatings the use of OMBRELUB MA 4 leads to a soft-feel touch. In contrast to other matting agents, OMBRELUB MA 4 does not have a negative effect on the performance of polyurethane thickeners.
OMBRELUB RA shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. The release effect maintains also during storage at elevated temperature. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers.
SÜDRANOL® 135 is a waterborne polyethylene dispersion for use at the exterior protection of glass containers and for exterior cold-end- modification of hollow glass.
TAFIGEL AP 10 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 10 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 11 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 11 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 15 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL AP 16 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL AP 16 requires an alkaline pH-value (>8) for optimum efficiency.
TAFIGEL® AP 75 N is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character. TAFIGEL® AP 75 N requires an alkaline pH-value (>8) for optimum efficiency. Main applications: Decorative Coatings Industrial and wood coatings Architectural coatings Adhesives Printing inks Paper coatings Conforms with 21 CFR 176.170 and 176.180: When used at a maximum level of 1% in coatings applied to uncoated or clay coated paper and paperboard at a maximum rate of 6 lb/1000 ft2 (wet basis).
TAFIGEL PUR 41 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 41 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 41 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints,silicate paints, high pH coatings, latex paints, anti- corrosive paints, emulsion plasters, adhesives, joint fillers, industrial and institutional cleaners and car care
TAFIGEL PUR 45 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 45 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 45 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 45 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, emulsion plasters, adhesives, printing inks and joint fillers.
TAFIGEL PUR 48 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 48 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 48 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, joint fillers, Industrial and institutional cleaners.
TAFIGEL PUR 60 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 60 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 60 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 61 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 61 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 61 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners. TAFIGEL® PUR 61 has been optimized for easy handling and easy incorporation. In many cases, the thickener can also easily be used in post-dosing.
TAFIGEL PUR 62 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 62 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 62 is recommended for use in industrial coatings. It is also recommended for following systems: interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.
TAFIGEL PUR 64 is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.
TAFIGEL PUR 64 R is a bio-based drop-in for TAFIGEL PUR 64. It is a so-called associative thickener, which builds up and stabilizes viscosity by forming a framework between thickener molecules, binder and pigments. Formulations with TAFIGEL PUR 64 R exhibit maximum pseudoplasticity. Viscosity is increased primarily in the low shear rate range, but without generating an elastic component that worsens the flow. The low viscosity in the high shear range resulting from the thickener results in excellent sprayability of the coating systems. TAFIGEL PUR 64 R can be used alone or in combination with other TAFIGEL thickeners or with cellulose or acrylate thickeners.
TAFIGEL PUR 65 is an associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 65 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 65 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and putties.
TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.
WÜKONIL® KN 50 is an established additive for after treatment of ready-mixed and formed concrete. The treatment of the concrete surface with WÜKONIL® KN 50 improves water retention in the concrete and enables a good set. Also at elevated outdoor temperatures it is not necessary to splash water on the concrete surface or to make a covering.
WÜKONIL® NAT 1000 is an aqueous emulsion for the application in aqueous lacquers and paint systems like wood coatings, dispersion paints and plasters. Content of renewable raw materials >90% (calculated on solid content) Content of readily bio-degradable raw materials >90% (calculated on solid content) Improves early rain resistance and provides good hydrophobic properties Drying at temperatures between 60-80 °C can increase the hydrophobing effect additionally Low dirt pick-up Gloss Slip Anti-blocking
WÜKONIL® O - 33 A (N) is a non-foaming, reactive, aqueous dispersion for surface treatment of paper, cardboard and textile glass mixing fabric.
ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.
