Wood Panels
Products
FENTAK® AF32908 is a high performance defoamer for waste and wash water applications.
FENTAK® AF32909 is a high performance and bio based defoamer for waste and wash water applications.
FENTAK® AF82915 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence.
FENTAK® AF82973 is a universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations.
FENTAK® CT0994 is a Formaldehyde Scavenger/Catalyst system used for production of Medium Density Fibreboard (MDF). It combines two technologies to allow production of reduced emission MDF with little or no loss in production rates and other board properties.
FENTAK® CT12110 is a catalyst for cold set UF and MUF resins. Typically used for furniture and door production.
FENTAK® CT12167 is a catalyst/scavenger for low mole ratio particleboard resin systems where standard catalysts are ineffective.
FENTAK® CT82000 is designed specifically as a high solids catalyst for Particleboard & MDF resins to increase production rates.
FENTAK® CT82020 is a high solids catalyst and scavenger used to speed the cure UF, MUF & MF resins in the production of Particleboard & MDF.
FENTAK® FC0436 is a high concentration complex aqueous organic dye for addition to Phenolic resin systems.
FENTAK® FC0437 is a high concentration complex aqueous organic blue dye for addition to Formaldehyde based resin systems such as Urea Formaldehyde, Melamine Formaldehyde and Phenol Formaldehyde resins.
Fentak® FC0440 is a solution of organic dyes, designed specifically for addition to phenolic resin systems in combination with MÜNZING Black dyes to form an intense black dye system.
FENTAK® FC0565 is a brown dye used for colouring resin systems used in wood panels or paper saturation. Also used to dye light coloured wood veneers.
FENTAK® FC0936 is a high concentration complex aqueous organic dye, designed specifically for addition to Phenolic resin systems.
FENTAK® FC0984 is a yellow dye used for colouring resin systems used in wood panels or paper saturation. Also used to dye light coloured wood veneers.
FENTAK® FC1403 is a high concentration complex aqueous organic dye. It is designed specifically for addition to Phenolic resin systems.
FENTAK® FC20939 is a green dye used for colouring resin systems used on wood panels. Highly concentrated. Typically used to indicate moisture resistant grades.
FENTAK® FC20941 is a red dye used for colouring resin systems used in wood panels. Highly concentrated. Typically used to indicate fire retardant grades. Also used to dye light coloured wood veneers.
FENTAK® FC30437 is a water based blue dye for use in the production of wood based panels where indentification of a specific type is required (Typically for Moisture resistant grade).
FENTAK® FC31409N is a highly efficient water based black dye used in the production of PF impregnated core stock for HPL and Compact Laminates and Phenolic Surface Films.
FENTAK® FC31413 is a water based red dye for use in the prodction of wood based panels where identification of a specific type is required (Typcially Fire Resistant Grade) or for use in Phenolic Surface Films.
FENTAK® FC31459 is designed specifically for addition to Formaldehyde based resin systems used within the decorative and industrial laminates industries. It is readily miscible in water and is stable at the high temperature environments encountered during pressing. FENTAK® FC31459 shows good compatability and stability with Phenol Formaldehyde impregnation resins, in particular, showing no signs of flocculation or foaming. As an added benefit it gives increased UV resistance over conventional black dye liquids.
FENTAK® FC80437 a high concentration complex aqueous organic blue/green dye designed specifically for addition to Formaldehyde based resin systems such as Urea Formaldehyde, Melamine Formaldehyde and Phenol Formaldehyde resins.
FENTAK® FC80565 is designed specifically for addition to Formaldehyde based resin systems such as Urea Formaldehyde, Melamine Formaldehyde and Phenol Formaldehyde resins used in paper impregnating.
FENTAK® FC80939 is designed specifically for addition to Formaldehyde based resin systems such as Urea Formaldehyde, Melamine Formaldehyde and Phenol Formaldehyde resins used in Particleboard and MDF manufacture.
FENTAK® FC80940 is designed specifically for addition to Formaldehyde based resin systems such as Urea Formaldehyde, Melamine Formaldehyde and Phenol Formaldehyde resins used in Particleboard and MDF manufacture.
FENTAK® FC88941 is a high concentration complex aqueous red dye, that can be used in a variety of water and solvent based polymer systems for identification purposes.
FENTAK® FS32543 is a clear edge seal product for sealing of edges of wood based panels and engineered wood applications (Can be supplied as a color tinted version).
FENTAK® FW31341 is a low foaming, anionic, silicone free wetting agent for the impregnation of papers with Melaime or Urea Formaldehyde resins for use in Laminates.
FENTAK® FW31348 is a high performance wetting agent for use with a broad range of polymer systems such as Phenol Formaldehyde and pMDI to give enhanced surface wetting and improved penetration and cohesion with the substrate.
FENTAK® FW81311 is a surfactant specifically designed to promote the wetting & distribution of UF & MUF resins in wood fiber composite products.
FENTAK® FW82322 is a surfactant specifically designed to promote the wetting & distribution of UF & MUF resins in wood fiber composite products.
FENTAK® IR22800 is designed specifically for efficient release of pMDI bonded boards. It is designed to give release from the press belts even at high dilution rates without foam stabilisation once diluted. FENTAK® IR22800 dissolves completely in water to give a clear solution which guarantees an easy handling with persistant and homogeneous release effect.
FENTAK® IR32800 is designed specifically for efficient release of pMDI bonded boards. It is designed to give release from the press belts even at high dilution rates without foam stabilisation once diluted. FENTAK® IR32800 dissolves completely in water to give a clear solution which guarantees an easy handling with persistant and homogeneous release effect.
FENTAK® IR32801 is a fatty acid based internal release agent for a number of adhesive binder systems such as MUF and pMDI used in wood based panels.
FENTAK® PG31439 is a high solids Black pigment dispersion for deep coloration and High UV resistance of phenolic impregnated kraft core or Phenolic Surface Films or for wood based panels.
FENTAK® PG80564 is a carbon black pigment in a dispersant mixture for addition to formaldehyde-based resin systems (PF, UF, MUF & MF) used for paper impregnation & wood panel manufacture.
FENTAK® TC 1550 (Black) is an opaque black water based anti-corrosion primer, which is designed specifically for application to reinforcing rod used in autoclaved aerated concrete (AAC) casting.
FENTAK® UR0174 is a release agent for application to the surface of wood panels to provide release from the hot press. Highly concentrated, imparts a caramel colour to the surface of the board.
FENTAK® UR0244 is a water based release agent for application to reconstituted wood based panels to provide release ina variety of ways.
FENTAK® UR0269 is a water based release agent for application into reconstituted wood-based substrates.
FENTAK® UR0756 is a release agent for application to the surface of wood panels to provide release from the hot press. Also prevents build up on the hot press. Low foam, ready to use.
FENTAK® UR0777 is a liquid, high solids release concentrate for mat spray applications. It is used in the manufacture of Door Skins, MDF and Particleboard.
FENTAK® UR12213 is a modified water based release agent to be used in multiple applications in Particleboard and Medium Density Fiberboard production.
FENTAK® UR12255 is a release agent for use with resin systems used in wood panel production. Can be used externally diluted and applied as a spary, or internally added to the resin.
FENTAK® UR22210 is a release agent for application to the surface of wood panels to provide release from the hot press. Typically diluted with water and sprayed directly onto the steel press belt. Contains additional press cleaning components.
FENTAK® UR32221 is a low foaming release release agent suitable for nozzle spray and rotor damping systems used in production of wood based panels.
FENTAK® UR32222 is a release agent for wood based panels which can either be used internally (added to the resin binder) or externally via a spray nozzle.
FENTAK® UR9956 is a release agent, specifically formulated to be used in multiple applications in Particleboard and Medium Density Fiberboard production.
